- Home
- E-bike batteries
- Ride1Up
- Revv 1 DRT (2024)
Ride1Up Revv 1 DRT (2024) battery
The Ride1Up Revv 1 DRT runs on a 52V 20Ah (1040 Wh) battery.
52 Vnominal voltage
1,040 Whbattery capacity
20 Ahamp-hours
5replacement packs listed
Battery specifications
- Nominal voltage
- 52 V
- Capacity
- 20 Ah
- Energy
- 1,040 Wh
- Battery weight
- 10.6 lb
- Motor
- Rear Hub, 1000W nominal
- Torque
- 95 Nm
- Class
- Class 3 (Unclassified Capable over 28 MPH)
- Launch price
- $2,395
Packs with matching voltage and capacity
Packs at 52V with at least 936 Wh
| Pack | Seller | Type | Voltage | Capacity | Price |
|---|---|---|---|---|---|
| Escooter EBike Battery S063 52V 60V 25Ah 30Ah BMS50A LG5000mAh Cells Li-ion EBik Cheapest Best $/Wh | Unit Pack Power | Aftermarket | 52 V | 1,300 Wh | $326 |
| 52V (14S4P) 21700 King Shark | EM3ev | Aftermarket | 52 V | 1,040 Wh | $399 |
| Triangle Battery P101 52V 72V 20AH BMS50A LG5000 Cells Li-ion EBike Battery For | Unit Pack Power | Aftermarket | 52 V | 1,040 Wh | $595 |
| Rhino 52-1250 Ebike Battery 52V (14S5P) 21700 From EM3ev | EM3ev | Aftermarket | 52 V | 1,250 Wh | – |
| EM3ev Rhino 5P 52V 25Ah Battery Pack (1260Wh) | 14S5P | EM3ev | Aftermarket | 52 V | 1,260 Wh | – |
Other Ride1Up batteries
More Ride1Up models
| Model | Year | Battery | Capacity |
|---|---|---|---|
| Portola 02 | 2026 | 48V 15Ah | 720 Wh |
| Vorsa FT | 2026 | 48V 15Ah | 720 Wh |
| Vorsa Lite | 2026 | 48V 15Ah | 720 Wh |
| Roadster V3 ST (Low-Step) | 2025 | 36V 10Ah | 360 Wh |
| Trailrush | 2025 | 36V 14Ah | 504 Wh |
| Vorsa | 2025 | 48V 15Ah | 720 Wh |
| Roadster V3 | 2024 | 36V 10Ah | 360 Wh |
| CF Racer1 | 2023 | 36V 7Ah | 252 Wh |
Frequently asked questions
What battery does the Ride1Up Revv 1 DRT use?
The Ride1Up Revv 1 DRT (2024) uses a 52V 20Ah, 1040 Wh battery.
How far can the Ride1Up Revv 1 DRT go on one charge?
The manufacturer did not publish a range estimate. As a rule of thumb, divide watt-hours by 15 to 25 Wh per mile.
Can I use a bigger battery on the Ride1Up Revv 1 DRT?
A higher amp-hour pack at the same 52V voltage adds range, as long as it fits the mount and connector. Do not use a higher-voltage pack unless the controller is rated for it.